Şuruburi are mecanic conectori that are widely used in diverse industries, but some consumers may not be aware of the fact that bolts factly have strength levels. The strength level of bolts is closely related to thelor use. This article will focus on explaining the strength level of bolts, hope to be helpful to everyone.
Cum la clasifica și eticheta șuruburi
Cele rezistență niveluri de șuruburi utilizate pentru oțel structură conexiuni sunt as urmează: 3.6, 4.6, 4.8, 5.6, 6.8, 8.8, 9.8, 10.9, 12.9, și mai mult decât 10 niveluri. Șurub forță grad etichetă este compus de două numere, reprezentând nominal tracțiune rezistență și randament raport de the material. Pentru exemplu, șuruburi of grad 4.6 reprezintă:
1. The nominal tracțiune rezistență valoare of the bolt material is at the level of 400MPa;
2. Randamentul randamentul rezistența raportul al șurubului materialului este {% 7b1}}.6;
3. The nominal yield strength of the bolt material is 400 × 0.6=240MPa.
Cum pentru a înțelege puterea nivelul din șuruburi
The meaning of bolt strength grade is an internationally recognized standard, and bolts with the same performance grade have the same performance regardless of their material and origin. Therefore, in the design, only the corresponding performance level can be selected. The strength level of bolts is usually expressed in numbers, such as 8.8 and 10.9, where numbers indicate that the shear stress levels of bolts are 8.8 GPa and 10.9 Gpa, respectively.
Cele specifice semnificație din grad 8.8 și 10.9 șuruburi
Modelul nominal rezistența la tracțiune de Grad 8.8 șuruburi is 800N/mm?, The nominal yield strength is 640N/mm?. Grade 10.9 bolts, on the other hand, require specialized heat treatment to achieve the following three performance indicators:
1. The nominal tracțiune rezistență valoare of the bolt material is 1000MPa level;
2. Randamentul rezistența raportul de șurub material is 0.9;
3. Randamentul nominal rezistența al șurub material atinge 900MPa nivel.
Cum la calculează rezistența gradul de șuruburi
Puterea gradul din general șuruburi este de obicei reprezentat de % 22X. Y". Among them, X * 100 reprezintă the tracțiune rezistență de acest șurub, în timp ce X * 100 * (Y/10) is the yield strength of this bolt, where Y reprezintă raportul of yield rezistența la tracțiunea rezistența. Pentru exemplu, nivel 4.8 indică că the tracțiune rezistență de the bolt is 400MPa, while the yield strength is 400 * 8/{10=320MPa.
rezumat
Este în special important pentru a înțelege puterea nivelul din șuruburi când selectarea ele. Precis judecată și calcul poate ajuta noi alege și utilizați mai mult adecvat șuruburi , prin aceasta mai bine asigurând nostru siguranță și stabilitate în muncă.






